Porcelain facade panel Vellum Score
AP-FV-005
Relief finishes · AP-FV-001
Porcelain facade panel Sandstone Corduroy
Extruded porcelain cladding panel in a pale wheat-cream finish with fine fluting, for ventilated facades on hotels, offices and residential blocks.
- Finish
- Sandstone Corduroy: Pale wheat-cream porcelain, dense micro-lined field, matt and evenly toned throughout
- Finish family
- Relief finishes
- Relief
- very fine close-pitch horizontal fluting, corduroy scale
- Material
- Extruded porcelain, single-fired, honeycomb core
- Weight
- 32 kg/m2
- Formats
- 40x80, 40x100, 60x120 cm in stock; widths 30 to 60 cm, lengths up to 300 cm; large formats 80x160 and 100x300 cm
- Water absorption
- ≤ 0.5%
- Reaction to fire
- Class A1
- Frost resistance
- Frost resistant
- Hardness
- Mohs 5 to 7
- Fixing
- Ventilated facade: vertical profiles and clamps, horizontal or vertical laying, open joint
m²
Ask for your quote: prices, lead time and shipping to your country come back within 24 working hours.
About this product
Sandstone Corduroy is a pale wheat-cream porcelain with a dense micro-lined field, matt and evenly toned throughout. Very fine close-pitch horizontal fluting at corduroy scale gives the surface a soft grain that catches low sun and keeps large flat elevations from reading blank. It suits full facades, plinths and lift cores where a pale, quietly textured wall is wanted.
The panel is single-fired extruded porcelain with an internal honeycomb structure, rigid at 32 kg/m2. It fixes to a ventilated substructure of vertical profiles and clamps, horizontally or vertically with an open joint, and the air gap behind cuts heating and cooling loads by up to 35%. Water absorption at or below 0.5%, frost resistant, class A1 reaction to fire, Mohs 5 to 7.
In the same range
Relief finishes →
Porcelain facade panel Almond Haze
AP-FV-006
Porcelain facade panel Custard Batten
AP-FV-004
Porcelain facade panel Dune Ripple
AP-FV-002