Porcelain facade panel Bleached Elm
AP-FW-005
Wood finishes · AP-FW-011
Porcelain facade panel Raw Poplar
Extruded porcelain cladding panel in a light honeyed cream wood finish, for ventilated facades on residential, hotel and leisure buildings.
- Finish
- Raw Poplar: Light honeyed cream wood with soft pale grain, tiny knots and dry matt face
- Finish family
- Wood finishes
- Material
- Extruded porcelain, single-fired, honeycomb core
- Weight
- 32 kg/m2
- Formats
- 40x80, 40x100, 60x120 cm in stock; widths 30 to 60 cm, lengths up to 300 cm; large formats 80x160 and 100x300 cm
- Water absorption
- ≤ 0.5%
- Reaction to fire
- Class A1
- Frost resistance
- Frost resistant
- Hardness
- Mohs 5 to 7
- Fixing
- Ventilated facade: vertical profiles and clamps, horizontal or vertical laying, open joint
m²
Ask for your quote: prices, lead time and shipping to your country come back within 24 working hours.
About this product
Raw Poplar is a light honeyed cream wood with soft pale grain, tiny knots and a dry matt face. The quiet figure reads well at distance and close to, so it carries whole elevations as easily as balcony returns, soffits and screen walls. Laid horizontally or vertically with an open joint, the grain can run with or across the facade.
The panel is single-fired extruded porcelain with an internal honeycomb structure, rigid at 32 kg/m2. It fixes to a ventilated substructure of vertical profiles and clamps, and the air gap behind cuts heating and cooling loads by up to 35% while damping outside noise. Water absorption stays at or below 0.5%, frost resistant, class A1 reaction to fire, Mohs 5 to 7.
In the same range
Wood finishes →
Porcelain facade panel Rosewood Ember
AP-FW-003
Porcelain facade panel Cacao Timber
AP-FW-010
Porcelain facade panel Caramel Larch
AP-FW-013